Two-flow asymmetric nozzle Hi Speed

Turbodrop HiSpeed
Dual spray nozzles with asymmetric angle. Spraying on both sides of the plant even at a higher speed. The "pink" ceramic core ensures a very high current holding cycle. Suitable for use in windy weather conditions. The applied pressure is 2.5-8 m, the optimal pressure is 4-8 h. Sizes 025 and 06 are classified in the drift limitation class (TOU) 90% also at higher speeds (max. 18 km/h

Agrotop wind drift reduction:

- 50% 2.5-6 bars

- 75% 2.5-3.5 bar

- 90% at 2.5 bar

The higher the driving speed, the greater the effect.

Conventional double flat beam nozzles with the same forward and backward angle achieve this effect only conditionally and approximately. They can balance up to a speed of 7-8 km/h. TurboDrop ® HiSpeed solves this problem with a very large rearward dispersion angle and a very small forward dispersion angle. As the driving speed changes, the angle of impact on the plant also changes - the rear will be smaller and the front will be larger. Ideally, they will be the same and the plant will be optimally wetted.